K+M Carbide Cutting Pilot w/Flutes, 270 Calibre/6.8MM Die Style_Bushing Bump Neck Sizer Die 277 Bullet Weight 120 gr

277 Bullet Weight 120 gr Bullet Style SST Boat Tail Ballistic Coefficient G1 0

375 Bullet Weight 350gr Bullet Style TSX Flat Base Ballistic Coefficient 0

It also works well for handgun cartridges 9mm to 500 S&W

Felt wads have been the first choice for shotshell loaders for several generations and nothing has changed

163 Sectional Density 0

K+M Carbide Cutting Pilot w/Flutes, 270 Calibre/6.8MM Die Style_Bushing Bump Neck Sizer Die 277 Bullet Weight 120 grThis finely ground carbide cutting pilot, designed for use with the K+M case neck turning body, has four cutting flutes used to remove the doughnut that can form at the inside neck wall and shoulder junction. If you are noticing the formation of a doughnut, this tool will remove the excess material without affecting inside neck diameter allowing for uniform bullet seating and eliminate powder gas restriction. There is also less friction between brass